Phone Calls - ZyXEL Communications P-2304R-P1 Series Quick Start Manual

4 Click Apply.
The P-2304R-P1 automatically restarts. When the POWER light stops blinking and stays on, follow the
directions in section 3.1
you set up in step 3, instead of http://192.168.1.1. If your computer's IP address is in a different subnet, follow
the directions in the appendices of the User's Guide to change your computer's IP address.

4 Phone Calls

Follow these directions to make calls over the Internet.
• If you want to dial a SIP number that only uses numbers (for example, "12345"), dial the number on your
phone's keypad. You can also set up a speed-dial entry, if you want. See the User's Guide for instructions.
• If you want to dial a SIP number that uses letters or if you want to make a peer-to-peer call, set up a speed-dial
entry first. See the User's Guide for instructions. Then, dial the speed-dial number to make the call.
• If you want to call regular telephone numbers, use your VoIP service provider's dialing plan.
• If you want to call the VoIP phone(s) that is connected to the P-2304R-P1 from a regular phone, use your VoIP
service provider's dialing plan. The P-2304R-P1 must be on.
P-2304R-P1 Series Quick Start Guide
to log in to the web configurator again. However, use the Management IP Address
10