Xerox Phaser 6200 Setup Manual page 5

2. Decide where to place the printer, considering the minimum clearance requirements shown in the
following illustration. Place the printer in an area where there is adequate space for ventilation,
operation and servicing. For user safety considerations, refer to the User Safety Summary section
of the Support Guide on the Interactive Documentation CD-ROM.
Caution
Do not block or cover the slots and openings on the printer; without adequate ventilation, the
printer may overheat.
3. Open the top of the box and remove the power cord, tray cover, imaging unit, and box labeled
Read Me First.
Caution
Do not attempt to lift the printer out through the top of the box.
Phaser® 6200 Color Laser Printer
10 cm
(4 in.)
60 cm
(24 in.)
74 cm
(29 in.)
Setting up the Printer
20 cm
(8 in.)
15 cm
(6 in.)
144 cm
(57 in.)
2