Setting The Scan Mode; Scanning - Brookstone i-Convert Instruction Manual

seTTIng The scan mode

1 . Turn the Scanner on by pressing the POWER/SCAN button for two seconds .
2 . By pressing the C/BW button, you may choose between Color and Mono .
3 . The Color or Mono icon will be displayed on the LCD screen to reflect
your choice .

scannIng

1 . With a microSD card inserted into the Scanner, turn the Scanner on by
pressing the POWER/SCAN button for two seconds .
2 . Hold the document you wish to scan securely on a flat surface .
3 . Place the Scanner flat against the document, scanning screen side down,
making sure the info you want to scan is between the SCAN GUIDES .
4 . Press the POWER/SCAN button once . The green SCAN LED INDICATOR
light will illuminate to show the Scanner is scanning .
5 . Roll the Scanner over the document you wish to scan slowly and evenly .
This will allow you to get the best quality scan possible .
6 . When you reach the end of the document, press the POWER/SCAN button
again to stop scanning .
7 . The COUNTING INDICATOR on the LCD screen will tell you the number
of saved scans you have completed .
8