Installing The Battery; Formatting Your Microsd Card - Brookstone i-Convert Instruction Manual

InsTallIng The baTTeRY

1 . Slide open and remove the BATTERY DOOR and insert 2 AA alkaline
batteries according to the polarity indicators inside the compartment .
2 . Replace the BATTERY DOOR and slide closed .
Note: the BatterY INdIcatOr on the led screen will reveal if the
batteries need to be replaced.

foRmaTTIng YoUR microsd caRd

Important: the microSd card must be formatted before scanning.
Note: all content on the microSd card will be erased during formatting.
1 . With the Scanner off, insert a microSD card (not included) into the
microSD CARD SLOT on the Scanner until it has clicked into place .
Note: do not force the microSd card into place. Forcing the card may
damage the microSd card or the scanner. See the diagram on the scanner
to insert the microSd card correctly.
2 . Turn the Scanner on by pressing the POWER/SCAN button for 2 seconds .
3 . Using a thin, blunt object, press the FORMAT button once . An "F" will show
on the LCD screen .
4 . Press the POWER/SCAN button once to begin formatting the microSD card .
5 . The microSD CARD INDICATOR will blink until the formatting process
is complete .
5