Scanner Setting - Brookstone Photo Scanner User Manual

SCanner SettinG

Press the SCAN button and then the MENU button to enter the scanner setting menu.
Press LEFT/ RIGHT button to select Scan or Setup.
Press UP/DOWN button to select an option from the submenus (below).
Menus Sub Menus
Scan
Color Mode
Color Optimum
Set up
Language
Format
Calibration
Factory Default
note: press Menu button repeatedly to go to the other level, or exit the Scan menu.
Descriptions
Selects a scan mode: Grayscale or Full Color.
This function provides a color optimization mechanism
which will achieve the best color match possible
based on the actual color content of the image.
Note 1: Scanning will take longer than normal with
this setting. Please be patient and wait until the
process is finished.
Note 2: This setting is set to its default of "OFF"
after the scanner is restarted.
English, German, French, Italian, Spanish, Dutch,
Portuguese, Polish.
Deletes all the data stored in the SD/MMC card.
Select OK to calibrate the scanner. Note: Refer to
page 9 for detailed procedures.
Restores the scanner settings to the default settings.
10