Determining Wall Plate Location - Samsung SMH7177STE/XAA Installation Instructions Manual

Installation Instructions
C.__. DETERMINING WALL PLATE LOCATION UNDER YOUR CABINET
Plate position - beneath flat bottom cabinet
"'"'", Mounting Plate Tabs
",. the Cabinet Bottom
\,
i"
\
t
o °O'°
°
_H
At feast 30"
Plate position - beneath framed recessed
cabinet bottom
\,
"__ Mounting Plate Tabs
/ Touching the Back
Frame
',
, \
,: ",,!
..... - ..... :-::::::iiii.. (1
2_
\
30" to Cooktop
Plate position - beneath recessed bottom
cabinet with front overhang
Mounting Plate with
Tabs Below Cabinet
Bottom the Same
Distance as the Front
Overhang Depth
\
30" to Cooktop
Your cabinets may have decorative trim that
interferes with the microwave installation. Remove
the decorative trim to install the microwave properly
and to make it level.
THE MICROWAVE MUST BE LEVEL.
Use a level to make sure the cabinet bottom is level.
If the cabinets have a front overhang only, with no
back or side frame, install the mounting plate down
the same distance as the front overhang depth. This
will keep the microwave level.
1. Measure the inside depth of the front overhang.
2. Draw a horizontal line on the back wall an equal
distance below the cabinet bottom as the inside
depth of the front overhang.
3. For this type of installation with front overhang
only, align the mounting tabs with this horizontal
line, not touching the cabinet bottom as described
in Step D.
9