More Calling Features - Sony Ericsson ELM Extended User Manual

To speed dial
Enter the position number and press
•

More calling features

Voicemail
If your subscription includes an answering service, callers can leave a voicemail message
when you cannot answer a call.
To enter your voicemail number
1 Select Menu > Messaging > Messages > Settings > the Message settings tab
> Voicemail number.
2 Enter the number and select OK.
To call your voicemail service
• Press and hold down
Voice control
By creating voice commands you can:
• Voice dial – call someone by saying their name
• Answer and reject calls when you use a handsfree
To record a voice command using voice dialing
1 Select Menu > Settings > General > Voice control > Voice dialing > Activate.
2 Select Yes > New voice command and select a contact. If the contact has more
than one number, select the number to add the voice command to.
3 Follow the instructions that appear. Wait for the tone and say the command to
record. Record a voice command such as "John mobile". The voice command is
played back to you.
4 If the recording sounds OK, select Yes. If not, select No and repeat steps 3 and 4.
Voice commands are saved in the phone memory only. They cannot be used in another phone.
To voice dial a contact
1 Press and hold down a volume key.
2 Wait for the tone and say a recorded voice command, for example "John mobile."
The phone plays the command back to you and connects the call.
To activate voice answering and record voice answer commands
1 Select Menu > Settings > General > Voice control > Voice answer > Activate.
2 Follow the instructions that appear and select Continue. Wait for the tone and say
"Answer", or say any other word.
3 Select Yes to accept or No to make a new recording.
4 Wait for the tone and say "Busy", or say any other word.
5 Select Yes to accept or No to make a new recording.
6 Follow the instructions that appear and select Continue.
Select the environments in which you want to activate voice answering.
7
To answer a call using voice commands
• Say "Answer."
To rerecord a voice command
1 Select Menu > Settings > General > Voice control > Voice dialing > Edit
names.
2 Scroll to a command and select Options > Replace voice.
3 Wait for the tone and say the command.
This is an Internet version of this publication. © Print only for private use.
.
.
21