Step 2: Preparing The Installation - Thermador VCI230DS Installation Manual

BEFORE INSTALLATION
Step 1" PREPARING THE CUTOUT
rq The wall must be flat and vertical.
rq Make sure that the wall is capable of providing a firm
hold for mounting screws and plugs.
Weight in kg: 24,5.
43"
If"
Preparing the wooden framework
171/4"
Step 2: PREPARING THE INSTALLATION
There are two mounting methods:
Installation in wooden framework or
Installation with the mounting brackets provided.
- Remove mounting brackets by removing screws
\
Preparing the installation with mounting
brackets
4 x 1/4" holes
I
18%"
,.J
- After removing the mounting brackets, the screws must
be inserted again.
PAGE 5