Trane Voyager 27½ to 50 Ton Installation, Operation And Maintenance Manual page 76

76
Mechanical
Specifications
modulates to meet the CO space
2
ventilation requirements.
BAYICSI004* — Field-installed Trane
Communication Interface (TCI).
BAYLTCI003* — Field-installed LonTalk
Communication Interface (LCI-R) for
Constant Volume (CV) units.
BAYLTCI004* — Field-installed LonTalk
Communication Interface (LCI-R) for
Variable Air Volume (VAV) units.
BAYSENS006* — Zone Sensor has one
temperature setpoint lever, heat, off or
cool system switch, fan auto or fan on
switch. Manual changeover. These
sensors are for CV units only.
BAYSENS008* — Zone Sensor has two
temperature setpoint levers, heat, auto,
off, or cool system switch, fan auto or
fan on switch. Auto changeover. These
sensors are used with CV units.
BAYSENS010* — Zone Sensor has two
temperature set point levers, heat, auto,
off, or cool system switch, fan auto or
fan on switch. Status indication LED
lights, System on, Heat, Cool, and Service
are provided. These sensors are used
with CV units.
BAYSENS013* — Zone temperature
sensor with timed override buttons used
with Tracer™ Integrated Comfort system.
BAYSENS014* — Zone temperature
sensor with local temperature
adjustment control and timed override
buttons used with Tracer Integrated
Comfort system. May also be used for
Morning Warm-up setpoint and sensor.
BAYSENS016* — Temperature Sensor is
a bullet or pencil type sensor that could
be used for temperature input such as
return air duct temperature.
BAYSENS017* — Remote Sensor can be
used for remote zone temperature
sensing capabilities when zone sensors
are used as remote panels or as a
morning warm-up sensor for use with
VAV units or as a zone sensor with Tracer
Integrated Comfort system.
BAYSENS019* and BAYSENS020* —
Electronic programmable sensors with
auto or manual changeover with seven
day programming. Keyboard selection
of heat, cool, auto fan or on. All
programmable sensors have System on,
Heat, Cool, Service LED/LCD indicators
as standard. Night setback sensors have
two occupied, and two unoccupied
programs per day. Sensors are available
for CV zone temperature control and VAV
zone temperature control.
BAYSENS021* — Zone Sensor with
supply air single temperature setpoint
and AUTO/OFF system switch. Status
indication LED lights, System ON, Heat,
Cool, and Service are provided. Sensors
are available to be used with VAV units.
BAYSTAT023* — Remote Minimum
Position Potentiometer is used to
remotely specify the minimum
economizer position.
RT-PRC007-EN