Advertisement
Product
Dimensions
26-3/4"
(67.9 Crn)
handle
24-1/4"
(61.6 crn)
©©
©©
b
!"crn/
_top
ght
46-1/4"
(117.5 crn)
overall height
for tall
backguard
models
29-7/8" (75.9 crn'
width
installation
Clearances
Cabinet opening dimensions shown are for 25" (64 cm)
countertop depth, 24" (61 cm) base cabinet depth and
36" (91.4 cm) countertop height.
If the cabinet depth is greater than 24" (61 cm), the oven frame
must extend beyond cabinet fronts by 1/2"(13 mm) minimum.
°
/_
30-1/8" (76.5 crn)
see NOTE.
I
opening width
1
18"(45.7crn)
I
2" (5.1crn)
rnin.
"_.
rnin. c learance
spaceto
upperside
sidewallor other
cabinetto
combustible m aterial
countertop
I
Thisshadedarea
._
recommended for
I
installation
I
of gas
pipe.
I
This shaded area
I
10" (25.4 crn)
recommended
for
2 _
3"
(5.1 crn)
(7,6 crn)_
NOTE: 24" (61 cm) minimum when bottom of wood or metal
cabinet is protected by not less than 1/4"(0.64 cm) flame retardant
millboard covered with not less than No. 28 MSG sheet steel,
0.015" (0.4 mm) stainless steel, 0.024" (0.6 mm) aluminum or
0.020" (0.5 mm) copper.
30" (76.2 cm) minimum clearance between the top of the cooking
platform and the bottom of an unprotected
wood or metal
cabinet.
If installing a range hood or microwave hood combination
above
the range, follow the range hood or microwave hood combination
installation instructions for dimensional clearances above the
cooktop surface.
Advertisement
