Table of Contents
Advertisement
Product Dimensions
A
I
..... J
D
C
B
Cabinet Dimensions
Cabinet opening dimensions shown are for 25" (64.0 cm)
countertop depth, 24" (61.0 cm) base cabinet depth and
36" (91.4 cm) countertop height.
IMPORTANT: If installing a range hood or microwave hood
combination
above the range, follow the range hood or
microwave hood combination
installation instructions for
dimensional clearances above the cooktop surface.
A freestanding range may be installed next to combustible walls
with zero clearance.
G
F
A. 467/8 '' (119.9 cm)
B. Model/serial number rating
label (located on bottom right
front of the toe kick plate)
C. 357/8 '' (91.4
cm)
D. 297/8 '' (75.9
cm)
E. 265/16 '' - 27¼"
(66.8
- 69.2 cm)*
*Excludes handle. Dimension given is from wall to front of oven
door and will vary based on electric outlet receptacle installation.
A. 13" (33 cm) upper cabinet
depth
B. 30" (76.2 cm) min. opening
width
C. For minimum clearance to the
top of the cooktop,
see NOTE.
D. 30" (76.2 cm) min. opening
width
E. Cabinet door or hinge should
not extend into cutout.
H
F. 3-wire shaded area -
7" (17.8 cm) min. from left side
cabinet, 53/4'' (14.6 cm) max.
from floor, 6" (15.2 cm) max.
width*
G. 4-wire shaded area -
10" (25.4 cm) min. from right
side cabinet, 53/4" (14.6 cm)
max. from floor, 6" (15.2 cm)
max. width*
H. 1V2" (3.8 cm) min. from floor if
using a flush mount outlet.
*Nothing located in shaded areas can extend more than 1 V2"
(3.8 cm) from waft or range wifl not slide aft the way back.
NOTE: 24" (61.0 cm) minimum when bottom of wood or metal
cabinet is covered by not less than V4"(0.64 cm) flame retardant
millboard covered with not less than No. 28 MSG sheet steel,
0.015" (0.4 mm) stainless steel, 0.024" (0.6 mm) aluminum or
0.020" (0.5 mm) copper.
30" (76.2 cm) minimum clearance between the top of the cooking
platform and the bottom of an uncovered wood or metal cabinet.
Hide quick links:
Advertisement
Table of Contents
