Whirlpool CHW9900WQ0 Installation Instructions Manual page 11

CODE
EXPLANATION
Options to use if SPECIAL PRiCiNG is se{ected (cont.):
8. 00 SPECIAL PRICE STOP HOUR
NOTE: Uses military time or 24 hr. clock
8. 00 This is the stop hour; 0-23 hours. Select STOP
HOUR by pressing the HOT button.
--> Press the WARM button once to advance
to next code.
r r
9. 10 SPECIAL PRICE DAY
r r r_
9. 10 This represents the day of the week and whether
special pricing is selected for that day. A number
followed by '0' indicates no selection that
particular day (9.10). A number followed by an'S'
indicates selected for that day (9.1S). To change
the value of '0' and 'S', use the COLD button.
Days of the week (1-7) are selected by pressing
the HOT button.
When exiting set-up code '9', the display must
show current day of week:
-->
A. 00
A. 00
A. SC
DISPLAY DAY OF WEEK CODE (slected)
10 Day 1 = Sunday 1S
20 Day 2 = Monday 2S
30 Day 3 = Tuesday 3S
40 Day 4 = Wednesday 4S
50 Day 5 = Thursday 5S
60 Day 6 = Friday 6S
70 Day 7 = Satday 7S
Press the WARM button once to advance to next
code.
VAULT VIEWING OPTION
This option is either SELECTED 'ON' or NOT
SELECTED 'OFF'.
-->
Selected 'ON'. Press the COLD button once for
this selection. When selected, the money and/
or cycle counts will be viewable (if counting is
selected) when the coin box is removed.
Press the WARM button once to advance to next
code.
--> Press the WARM button once to advance
to next code.
r r ; r ; i i
C. 35 VALUE OFCOIN 2
...... r r ................................................................... ..................................... ;; r; r r; r
C. 35 This represents the value of coin 2 in number
of nickels; 35 = $1.75.
By pressing the HOT button you have the option
of 1-199 nickels.
--> Press the WARM button once to advance
to next code.
CODE EXPLANATION
r
d. CS COIN SLIDE OPTION
This option is either SELECTED 'ON' or NOT
SELECTED 'OFF'.
r; r r ; r ........................... r; r r; ; ; r
d. CS Selected 'ON'. When coin slide mode is selected
'ON', set 'b.' equal to value of vend price in
nickels. Set set-up code 6 xx (regular cycle
price) and set-up code 3.xx (special cycle price)
to number of slide pushes. If washer is set up
as 'CS' and a coin drop is installed, it will not
register coins.
d. 00 Not Selected 'OFF'. Used when washer is set-up
as OPL, or with a coin drop or a card reader.
--> Press the WARM button once to advance
to next code.
r
E. 00 ADD COINS OPTION
This option is either SELECTED 'ON' or NOT
SELECTED 'OFF'. This option causes the
customer display to show the number of coins
(coin 1) to enter, rather than the dollars-and-
cents amount.
r
E. 00 Not Selected 'OFF'.
E. AC Selected 'ON'. Press the COLD button
3 consecutive times for this selection.
--> Press the WARM button once to advance
to next code.
...................................................... Jr r rJ rJ r Jr
E 00 ENHANCED PRICING OPTION
F. 00 Not Selected 'OFF'.
R CP Cycle-Based pricing enabled. This option allows
configuration of different prices for cold, warm,
and hot water selections.
--> Press the WARM button once to advance
to next code.
r_ rJ J i
J. Cd CO{N/DEBIT OPTION
r r
J. Cd Both coin and debit selected. Press the COLD
button 3 consecutive times to change this
selection.
J. C Coins selected, debit disabled. Press the COLD
button 3 consecutive times to change this
selection.
J. d Debit Card selected, coins disabled. Press the
COLD button 3 consecutive times to change this
selection.
J. Ed Enhanced debit is self-selected when a
Generation 2 card reader is installed in the
washer. The Ed option cannot be manually
selected or deselected.
--> Press the WARM button once to advance
to next code.
r .......................................... ; ; i r; r r;; r
L. 00 PRICE SUPPRESSION OPTION
This option causes the customer display to
show 'ADD' or 'AVAILABLE' rather than the
amount of money to add. (Used mainly in debit
installations.)
r r
L. 00 Not Selected 'OFF'.
L. PS PS Selected 'ON'. Press the COLD button once
for this selection.
--> Press the WARM button once to advance
to next code.
11