Editing; Dubbing To A Vcr; Dubbing To Or From A Video Unit Equipped With A Dv Connector (Digital Dubbing) - JVC GR-D750AA Getting Started Manual

Dubbing To A VCR

To use this camcorder as a player
1
Following the illustration, (
"Connections To A TV Or VCR", connect the
camcorder and the VCR's input connectors.
2
Perform steps 1 – 6. (
3
At the point you want to start dubbing, start
recording on the VCR. (Refer to the VCR's
instruction manual).
4
To stop dubbing, stop recording on the VCR,
then stop playback on the camcorder.
NOTES:
It is recommended to use the AC Adapter as
the power supply instead of the battery pack.
( pg. 13)
To choose whether or not the following displays
appear on the connected TV
• Date/time
Set "DATE/TIME" to "ON" or "OFF".
( pg. 23, 27)
• Time code
Set "TIME CODE" to "OFF" or "ON".
( pg. 23, 27)
• Indications other than date/time and time code
Set "ON SCREEN" to "OFF", "LCD" or "LCD/
TV". ( pg. 23, 27)
Dubbing To Or From A Video Unit
Equipped With A DV Connector
(Digital Dubbing)
It is also possible to copy recorded scenes from
the camcorder onto another video unit equipped
with a DV connector. Since a digital signal is
sent, there is little, if any, image or sound
deterioration.
pg. 22)
pg. 22)
Core filter
Video unit equipped with DV connector
To use this camcorder as a player
1
Make sure all units are turned off.
2
Connect this camcorder to a video unit
equipped with a DV input connector using a DV
cable as shown in the illustration.
3
Start playback on the camcorder. (
4
At the point you want to start dubbing, start
recording on the video unit. (Refer to the video
unit's instruction manual.)
5
To stop dubbing, stop recording on the video
unit, then stop playback on this camcorder.
NOTES:
It is recommended to use the AC Adapter as the
power supply instead of the battery pack.
( pg. 13)
If a blank portion or disturbed image is played back
on the player during dubbing, the dubbing may stop
so that an unusual image is not dubbed.
Even though the DV cable is connected correctly,
sometimes the image may not appear in step 4.
If this occurs, turn off the power and make
connections again.
When using a DV cable, be sure to use the
optional JVC VC-VDV204U or VC-VDV206U DV
cable.

EDITING

33
EN
To DV IN/OUT
DV cable
(optional)
To DV IN/OUT
pg. 20)