Washing Sequence - Haier HWM90-0713S User Manual

Washing sequence

Wash timer
Water inlet
(To set to below 2 minute,
first set to 6 minute then
turn it back. it can increase
the service life of the timer).
15
12
WASH TIMER
Wash
1. Fill the water and add the dissolved washing
powder to make the water level reach the preset
position. (Figure 1)
Run washing program for some time to stir and
dissolve the powder completely.
2.Put in the laundries. If the water quantity is
insufficient, please add water.
3.Select the current.
Select the strength of the current according to
the laundries. (Figure 2)
4.Select the washing time
Select the washing time according to the laundries.
(Figure 3)
5.After washing, set the "WASH
SELECTOR" at "DRAIN". (Figure 4).
Wash selector
(standard current,
strong current)
STRONG
OFF
3
STANDARD
6
9
9
WASH SELECTOR
8
Spin timer
(to set to below 1 minute,
first set to 2 minute then
turn it back. it can increase
the service life of the timer).
OFF
5
DRAIN
4
3
SPIN TIMER
STRONG
STANDARD
DRAIN
WASH SELECTOR
OFF
15 3
12
6
9
WASH TIMER
STRONG
DRAIN
WASH SELECTOR
1
2
Figure 1
Figure 2
Figure 3
Figure 4