Download Print this page
Haier HWM90-96A User Manual
Haier HWM90-96A User Manual

Haier HWM90-96A User Manual

Haier automatic washing machine user's manual

Advertisement

Quick Links

Full Automatic Washing Machine
This manual is for
HWM90-96A
Please read this manual carefully
before using.
0030807216
Retain it for future reference.

Advertisement

loading

Summary of Contents for Haier HWM90-96A

  • Page 1 Full Automatic Washing Machine This manual is for HWM90-96A Please read this manual carefully before using. 0030807216 Retain it for future reference.
  • Page 2: Table Of Contents

    Computerized Automatic washing machine Bottom plate Between the upper cushion of the washing machine package and the upper seal of the package carton Specification table Model HWM90-96A Rated voltage frequency 220V-240V ~ 50Hz Standard Rated washing / spinning capacity 7.0kg 9.0kg...
  • Page 3: Names Of The Parts

    Trouble-shooting answer to question (If there's breakdown, please pull off the power plug before checking) The following phenomena are not breakdowns sometimes. Please confirm again before sending it to repair. If there are real breakdowns, please come to the special maintenance department or after-sale service department of our company.
  • Page 4: Safety Precautions

    Safety precautions Please plug the power plug on special The washing machine must be positioned so that the plug is accessible. Be sure to pull the receptacle. Be sure to use three-pins plug off and close the water faucet in power receptacle.
  • Page 5: Installation And Adjustment

    If you open the top lid during the running program, The digitron displays E2 5 Close the top lid As the top lid opened ,the Washer will automatically give an alarm and stop running , exclusively during supplying water and rinsing. 6 Finish washing After finishing wash it'll switch off the power automatically.
  • Page 6: Usage Of The Drain Hose

    Adjust the Installation position The largest allowed slope of the shank base of the machine is 2 . The slanting or rough ground will result in unstable running or stoppage of the machine. Please adjust it with following methods: Confirm it's horizontal horizontal Hang the plumb to confirm it's Adjust the adjustable foot...
  • Page 7: Install The Water Inlet Hose

    Steps of using the operation buttons and description of the steps TIME REMAINED(MINUTE) MINUTES MINUTES TIMES MINUTES nano wash RESERVE(HOURS LATER) HWM90-96A (18L) Digital tub display 10 water level selection 12 mins quick wash WATER LEVEL RESERVE Push the "POWER ON/OFF " button to switch on the power.
  • Page 8 Connection between the water inlet hose and the washer 1.Do not take off the water absorption cushion. Please check if the cushion is dropped or damaged before each usage. If it happens please contact our after-sale department immediately. 2 Put the nut of the water inlet hose on the valve jointer.
  • Page 9: Preparation Before Washing

    During the machine works,all buttons except LEVEL button and START/PAUSE button unselect. During the machine works,opening the top lid the machine will give a beep alarm. MINUTES HWM90-96A Digital tub display 10 water level selection 12 mins quick wash SOAK...
  • Page 10 2 Put in the laundries The capacity of washing and spinning of the machine refer to the largest weight of the standard laundries under dry condition that can be washed or spinning in one time. One time washing quantity shall be lower than the rated capacity.