Ford 2010 Explorer Owner's Manual page 230

Seating and Safety Restraints
Perform the following steps to install a child safety seat with tether
anchors:
1. Route the tether strap under the head restraint and between the head
restraint posts.
For vehicles with adjustable head restraints, route the tether strap under
the head restraint and between the head restraint posts, otherwise route
the tether strap over the top of the seatback.
2. Locate the correct anchor for the selected rear seating position.
When placing a child safety seat in the 2nd row center seating position
of the 5–passenger vehicle, the tether straps may be attached to either
of the tether anchors located at the rear of the cargo area.
• Behind 2nd row seat
• At the rear of the cargo area
230
2010 Explorer (exp)
Owners Guide, 2nd Printing
USA (fus)