Keys And Remote Controls - Ford 2013 FUSION HYBRID Owner's Manual

Hide thumbs Also See for 2013 FUSION HYBRID:

Table of Contents

Note: Do not touch the battery contacts or

the printed circuit board with the

screwdriver.

4. Insert a screwdriver as shown to

release the battery.

5. Remove the battery.

6. Install a new battery with the + facing

Replace the battery cover.

Intelligent Access Transmitter

The remote control uses two coin-type

three-volt lithium batteries CR2025 or

Keys and Remote Controls

Slide the release on the back of the

remote control and pivot the cover off.

2. Insert a coin into the slot and twist to

separate the housing.

3. Remove the batteries.

4. Install new batteries with the + facing

Note: Make sure to replace the label

between the two batteries.

2013 fusion energi