Keys And Intelligent Access - Ford 2013 FUSION HYBRID Owner's Manual

Hill Start Assist
Message
Hill Start Assist Not
Available

Keys and Intelligent Access

Message
Press Brake to START
No Key Detected
Restart Now or Key is
Needed
Run Power Active
Starting System Fault
Press Brake and Clutch
to Start
Press Clutch to Start
Key Program Successful
Key Program Failure
Max Number of Keys
Learned
Not Enough Keys
Learned
Key Battery Low Replace
Soon
Could Not Program
Integrated Key
Information Displays
Displays when hill start assist is not available. Contact your
authorized dealer. See Hill Start Assist (page 164).
Displayed as a reminder to press the brake while starting the
Displayed if the key is not detected by the system. See
Keyless Starting (page 132).
Displayed when the start/stop button is pressed to shut off
the engine and an Intelligent Access key is not detected inside
Displayed when the vehicle is in the run ignition state.
This message is displayed when there is a problem with your
vehicle's starting system. See your authorized dealer for
Displayed as a reminder to press the brake and clutch while
Displayed as a reminder to press the clutch in while starting
Displayed during spare key programming, when an intelligent
access key is programmed to the system.
Displayed during spare key programming, when an intelligent
access key has failed to be programmed.
Displayed during spare key programming when the maximum
number of keys have been programmed.
Displayed during spare key programming when not enough
keys have been programmed.
Displays when the key battery is low. Change the battery as
Displayed when an attempt is made to program a spare key
using two existing MyKeys.
102
Action
Action
vehicle.
the vehicle.
service.
starting the vehicle.
the vehicle.
soon as possible.