Table of Contents
Advertisement
How to change the direction of the drain hoses
Figure 1 indicates the ex factory
installation position of the drain
hose.
Extend the drain hose from the side of spin tub.
Take off the drain hose from the hanging
hole of the cabinet. Pull the drain hose
fixing hook outwards gently to take out
the drain hose from the two fixing hooks.
(As per Figure 2)
Rotate the drain hose fixing hook for 90
to take it out from the installation hole
(As per Figure 3).
Install the two drain hose
fixing hooks taken out into
the installation hole at the
other side of the base frame
(to aim at the installation
hole accurately
lean the washing machine
forward slightly).Then rotate
for 90 (As per Figure 4).
Pull the fixing hook outwards slightly.
Inlay the drain hose into the fixing hooks
reliably along the groove at spin tub side,
and make it extend towards spin tub side.
Extend the drain hose from the rear side
Take out the drain hose from the fixing hook. Extend it from the rear side (When
the drain hose is extended from the rear side, it can be hung on the point for drain
hose at the two sides of the cabinet.) (See to Figure 6).
Figure 1
you can
Pull outwards
slightly
Drain hose
fixing hook
Rotate the fixing
hook for 90
Take off the fixing
hook downwards
Figure 3
Figure 5
Side sectional view
Drain hose
Fixing hook
fixing hook
installation hole
Drain hose
Take off
the drain hose
Figure 2
Rotate the fixing
hook for 90
to fix it
Insert the fixing hook into the
installation hole upwards
Figure 4
Figure 6
5
Advertisement
Table of Contents
