Dell PowerConnect M8024-k User Manual page 47

Stacking PowerConnect 10G Switches: M8024-k, 8024, 8024F
TFTP server. The stack will need access to the TFTP server on the network and the firmware file will
need to be present in the download folder of the TFTP server. Perform the following:
4. Select System > File Management > File Download.
5. Select Firmware for the File Type, and TFTP for the Transfer Mode.
6. Enter the IP address of the TFTP server into the Server Address field, and enter the name of
the Firmware file into the Source File Name field.
7. If not in the root directory of the TFTP server, enter the path of the firmware file.
8. Click Apply.
The dialog box below will appear after a short period stating the transfer is complete.
45