Dell PowerConnect M8024-k User Manual page 39

Stacking PowerConnect 10G Switches: M8024-k, 8024, 8024F
members are to be added, follow these directions and complete the install of one before going to the
next. Complete these steps again for each remaining switch to be added.
The example given below allows the user to add the new member without preconfiguring the existing
stack, though the new member itself will need to be configured. To preconfigure a stack before
connecting the new stack member, consult the User Guide under Preconfiguring a Stack Member.
1. On the new member switch to be added to the stack, select System > Stack Management >
Stack Port Summary from the main navigation menu.
2. Set the Stack mode on ports 21 and 22 (or the ports desired) to Stack mode.
3. Click Apply.
The next screen will save the configuration to the Startup Configuration.
4. Select System > File Management > Copy Files from the main navigation menu.
5. Select the Copy Configuration option, using a Source of Running Config, and a Destination of
Startup Config.
37