Table of Contents
Advertisement
1. Information of DI-2621 Router
This section introduces the total performance and parameter of DI-2621 Router to help the reader to understand
it .
1.1 Information of standard configuration
The standard configured ports of DI-2621 Modulor Router are consist of four parts : 2 Fast Ethernet ports, 1
Console port, 1AUX port ,and 1double serial port.The detailed information is as the following table:
Performance table of standard configuring port :
Port name
Fast Ethernet port
Console port
AUX port
Fast Serial port
There are 2 interface card slots, 1 power slots, 1 power switch (ON: open; OFF: close), 1 toutch-ground lug and 1
bar vent(strip vent can help to create cool condition)
The DI-2621 Modular Router front panel is as the following picture:
Parts information table of the front panel of Router.
No.
Name
1
PWR
2
SYS
3
S0
4
S1
5
S2
Rear panel picture is as the following table:
Information table of rear panel parts of the Router :
No.
Name
1
2
Power
3
4
CON
5
AUX
rate 10/100M ，UTP (RJ45)interface，with ACT、Link、100Mbps indicator
light.
rate 1200bps—115200bps，RJ45 interface，no indicator light.
rate 1200bps—57600bps，RJ45 interface，no indicator light.
rate 2400bps---2048000bps，DB60 interface.
Figuer 1-1 DI-2621 Modulor Router front panel
Description
Power indicator light
System indicator light
Slot 0 indicator light
Interface card slot 1 indicator light
Extend ed interface card slot 2-indicator light.
Description
Alternating power socket
Power switch
Touch ground lug
Console port
AUX port
Feature
Light ON indicates the Router is power on
Light ON indicates the system starts successfully,
Light ON indicates standard slot is valid
Light ON indicates Slot1 has interface card
Light ON indicates Slot2 has interface card
AC100～240V
Press up is ON, down OFF.
Touch-ground is well
- 1 -
DI-2621 Router
Information
Information
Advertisement
Table of Contents
