Table of Contents
Advertisement
Backing Module BK-7m
Other important functions
Metronome
The BK-7m is equipped with a metronome that can be
used in various situations. To use the metronome, here
is what you need to do:
NOTE
While Music Style or SMF song playback is stopped, the
[TAP TEMPO] button flashes in blue to indicate the selected
tempo.
1.
Press and hold the [TAP TEMPO] button.
The display changes to:
2.
Rotate the [CURSOR÷VALUE] dial to select
the "Metronome" field.
3.
Press the dial to highlight the setting.
4.
Rotate the dial to select "On", then press the
dial.
The metronome starts counting.
NOTE
The metronome is not available while an audio song file
(mp3 or WAV) is selected.
The metronome parameters you can set are:
Parameter
Setting
Metronome
Off, On
Volume
0~127
Time Signature 1~32/16, 8,
4, 2
Mode
Always, Play
40
Explanation
Select "On" to activate
the metronome.
Sets the metronome's
level.
Specifies the metro-
nome's time signature.
Always: The metro-
nome even counts
when playback is
stopped.
Play: The metronome
only sounds while the
Music Style or song is
playing.
Parameter
Setting
Count In
Off, 1bar, 2bar This parameter allows
NOTE
You can also call up the "Metronome" page using [MENU]
button ‰ "Global" ‰ "Metronome".
Explanation
you to switch the
Count-In function on
("1 BAR" or "2 BAR") or
off. When on, the met-
ronome will count in
the specified number
of measures (bars)
before the Music Style
or SMF song starts
playing. (This setting is
not available for audio
songs.)
Advertisement
Table of Contents
