Table of Contents
Advertisement
Press the [EXIT] button if you prefer not to save these
settings. In that case, the BK-7m goes on using the
last configuration you selected.
The settings of the last MIDI Set you saved will be
loaded each time you switch on the BK-7m. There is
thus no need to use the "Wizard Connection" func-
tion as long as you don't change your MIDI setup.
NOTE
In addition to the parameters that can be saved to the
"User1" MIDI Set, the "Wizard Connection" also saves other
settings. See page 87 for details.
Details about the 'Wizard
Connection' categories
Depending on the category and option inside that cate-
gory, the BK-7m may ask you to play a few notes on the
external instrument. This allows it to automatically set
the correct MIDI channels and to make several other
useful settings.
See also "'Wizard Connection' MIDI channel settings" on
p. 26 for an overview of the other settings performed by
the "Wizard Connection" function.
'DIGITAL PIANO' category
Select "ROLAND" for a digital piano made by Roland
that transmits on MIDI channel 1 by default.
• The only step will be "Wizard Settings will be
saved" (see step (7) above).
Select "OTHERS" if your digital piano transmits on a dif-
ferent MIDI channel. Here, there are two steps:
• "Play a note on piano keyboard" ‰ Press any key
on your digital piano.
• "Wizard Settings will be saved" (see step (7) above).
NOTE
If necessary, set the digital piano's MIDI transmit and
receive channels to the same number.
• The digital piano can be used to play the BK-7m's
real-time parts and to control the Arranger.
• Changing the status of the [SPLIT] button allows you
to alternate between two chord recognition modes:
"Pianist" ([SPLIT] button dark) and "Intelligent"
([SPLIT] button lights). See "Using Split mode" on
p. 39 for details.
• See page 27 for how to switch the real-time parts on
and off.
About 'Soft Thru: Piano'
The "DIGITAL PIANO" settings automatically select the
"Soft Thru: Piano" setting, which means that the
BK-7m transmits a "Local Off" message to the piano
when you switch it on. This only works if the follow-
ing conditions are met:
• the BK-7m's MIDI OUT socket is connected to the
digital piano's MIDI IN socket.
Backing Module BK-7m
Details about the 'Wizard Connection' categories
• the digital piano is already on when you switch on
the BK-7m.
In "Soft Thru: Piano" mode, the BK-7m transmits the
note messages received via MIDI IN back to its MIDI
OUT socket. Those messages are then used to trigger
the digital piano's tone generator. The piano's "Local
Off" setting indeed means that its keyboard is no
longer connected to its internal tone generator.
Soft Thru: Piano
MIDI OUT
The keyboard's messages are
returned to the piano.
MIDI IN
This connection is necessary to ensure that the digital
piano's tone generator does not receive the chords
you play in the left half (while the [SPLIT] button
lights), because the chord notes are usually only used
to specify the arranger's key.
NOTE
The digital piano's "Local" parameter is not reset when you
disconnect the MIDI cables. You may have to do this manu-
ally (see the digital piano's owner's manual). In most
instances, however, switching the piano off and back on
will reset the piano's "Local" parameter to "On".
'ACCORDION' category
Select "V-ACCORDION" if you want to control the
BK-7m from a Roland FR-series instrument. Its treble,
orchestral, bass & chord, and (if available) Free Bass sec-
tions will trigger the UP1, UP2, LWR and MBS parts
respectively. The chords you play with the chord buttons
(left hand) are used to "feed" the BK-7m's Arranger.
• The only step will be "Wizard Settings will be
saved" (see step (7) on page 22).
NOTE
The BK-7m's wizard assumes that the FR-series accordion
uses the default MIDI channel numbers.
r
MIDI IN
MIDI OUT
What you play on the
keyboard is transmitted
to the BK-7m. The
piano's tone generator
does not receive these
messages.
23
Advertisement
Table of Contents
