Belkin Wireless G Router User Manual page 42

Alternate Setup Method
Setting your Connection Type if you are a Telstra
[Australia Only]. Your user name and password are provided to you by
Telstra BigPond. Enter this information below. Choosing your state from
the drop-down menu
address. If your login server address is different than the one provided
here, you may manually enter the login server IP address by placing a
check in the box next to "User decide login server manually"
type in the address next to "Login Server"
all of your information, click "Apply Changes"
changes, the "Internet Status" indicator will read "connection OK" if
your Router is set up properly.
(1)
(2)
(3)
(4)
(5)
1. Select your State
Select your state from the drop-down menu
box will automatically be filled in with an IP address. If for some
reason this address does not match the address that Telstra has
given, you can manually enter the login server address. See "User
decide login server manually"
2. User Name
Provided by your ISP. Type in your user name here.
3. Password
Type in your password and retype it into the "Retype Password"
box to confirm it.
(6)
will automatically fill in your login server IP
(4)
.
38 38
BigPond User
®
(5)
. When you have entered
(7)
. After you apply the
(7)
(6)
. The "Login Server"
(4)
and
(6)