Belkin Wireless G Router User Manual page 40

Alternate Setup Method
Setting your Internet Service Provider (ISP) Connection Type to
Point-to-Point Tunneling Protocol (PPTP)
[European Countries Only]. Some ISPs require a connection using PPTP
protocol, a type of connection most common in European countries. This
sets up a direct connection to the ISP's system. Type in the information
provided by your ISP in the space provided. When you have finished,
click "Apply Changes" (9). After you apply the changes, the "Internet
Status" indicator will read "connection OK" if your Router is set up
properly.
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
1. PPTP Account
Provided by your ISP. Enter your PPTP User ID here.
2. PPTP Password
Type in your password and retype it into the "Retype Password"
box to confirm it.
3. Host Name
Provided by your ISP. Enter your host name here.
4. Service IP Address
Provided by your ISP. Enter your PPTP gateway/service IP
address here.
36 36
(9)