Belkin Wireless G Router User Manual page 117

Troubleshooting
Supported Operating Systems:
• Windows XP Professional
• Windows XP Home Edition
Enabling WPA-PSK (no server)
1.
In systems running Windows XP, click "Start > Control Panel >
Network Connections".
2.
Right-click on the "Wireless Networks" tab. The "Wireless
Network Connection Properties" screen appears. Ensure the
"Use Windows to configure my wireless network settings" box
is checked.
3.
Under the "Wireless Networks" tab, click the "Configure" button,
and you will see the client card properties screen.
4.
For a home or small business user, select "WPA-PSK" under
"Network Administration".
5.
Select "TKIP" or "AES" under "Date Encryption". This setting will
have to be identical to the Wireless G Router or access point
that you set up.
6.
Type in your encryption key in the "Network key" box.
Important:
to 63 characters and can be letters, numbers, or symbols. This
same key must be used on all of the clients that you set up.
7.
Click "OK" to apply settings.
Enter your pre-shared key. This can be from eight
113 113
1
2
3
4
5
6
7
8
9
10