Receiving An Individual Call; Call Waiting Directory; Enabling The Call Waiting Feature - Standard Horizon Quantum GX5000S Owner's Manual

11. When an individual call acknowledgment is re-
ceived, the established channel is automatically
changed to the channel which is selected on
step 5 above and a ringing tone sounds.
12. Press the [ CLR ] key to listen to the channel to
make sure it is not busy, then key the micro-
phone and call the other vessel you desire to
communicate with.

11.5.5 Receiving an Individual Call

When receiving an individual call, an acknowledgment must be sent back to the
calling station. The GX5000S default setting is Automatic, but has a selection
that allows you to manually send a reply before the radio will switch to the re-
quested calling channel. This selection is useful if you want to see who is calling
and requesting you to switch to a channel for communications, similar to caller id
on a cellular phone.
1. When an individual call is received, an individual call ringing alarm sounds.
The radio automatically (automatic mode selected) switches to the re-
quested channel. The LCD shows the MMSI of the
vessel calling.
2. Press any key to stop the alarm.
3. Press the PTT on the mic and talk to the calling ship.

11.6 CALL WAITING DIRECTORY

The GX5000S logs received distress calls and individual calls. The DSC Call
Waiting feature is similar to an answer machine where calls are recorded for
review. When a call is logged while the radio is set on
the DSC Standby function, a "
the LCD. The GX5000S can memorize up to the latest
30 Distress, and up to the latest 80 Individual Calls.

11.6.1 Enabling the Call Waiting Feature

Follow the steps below to enable or disable the Call Waiting feature.
1. Press and hold down the [ CALL ( MENU )] key
until "Radio Setup Radio Setup" menu appears.
Radio Setup Radio Setup
Radio Setup
2. Turn the CHANNEL selector knob to select
"DSC Setup DSC Setup" menu.
DSC Setup DSC Setup
DSC Setup
3. Press the [ ENT ] key, then select "Individual Ack
with the CHANNEL selector knob.
4. Press the [ ENT ] key.
5. Turn the CHANNEL selector knob to select
"Able to comply Able to comply" or "Unable
Able to comply Able to comply
Able to comply
Page 46
" icon will appear on
Individual Ack Individual Ack" Individual Ack
Individual Ack
Unable Unable
Unable." Unable
GX5000S