Table of Contents
Advertisement
YES
10. Press the
al DSC signal.
11. After an individual call is transmitted, if the reply signal is not received,
" Waiting for ACK " is shown on the display which means the GX1300E
is waiting for the vessel you called to send an acknowledgement.
To transmit the call again, press the
12. When the GX1300E receives an acknowledgement from the vessel
you called, the radio will automatically switch to the operating channel
selected in step 9 and produce a ringing sound.
13. Key the microphone and call the other vessel you desire to communi-
cate with.
9.5.5 Receiving an Individual Call
When receiving an individual call, an acknowledgment must be sent back
to the calling station. The GX1300E in the default setting will automatically
respond to the calling station and switch to the requested channel for voice
communications. Refer to the section "9.5.2 Setting up Individual Call
Reply" if you want to change the setting to see who is calling before replying
to the call.
Automatic reply:
1. When an individual call is received, a ringing alarm sounds.
The GX1300E automatically switches to the requested channel. The
display shows the MMSI or the name of the vessel transmitting the
individual call.
2. Press any key to stop the alarm.
Q U I T
3. Press the
operation.
4. Monitor the channel to make sure it is clear,
then press the PTT switch on the microphone
and talk to the calling vessel.
Manual reply:
1. When an individual call is received, a ringing alarm sounds.
The display shows the MMSI or the name of the vessel transmitting the
individual call.
2. Press any key to stop the alarm.
GX1300E
soft key to transmit the individu-
soft key to return to radio
CATEG: ROUTINE
Transmit a Call?
RESEND
soft key.
INDIVIDUAL
366901555
CH: 08
YES
NO
Page 51
Advertisement
Table of Contents
