When The Register Does Not Operate At All; Clearing A Machine Lock Up - Casio SE-S6000 User Manual

Troubleshooting

When the register does not operate at all

Perform the following check whenever the cash register enter an error condition as soon as you switch it on. The
results of this check are required by service personnel, so be sure to perform this check before you contact a CASIO
representative for servicing.
Start
Is register plugged in?
Is power on?
Do figures appear on the display?
Do keys function?
Does paper feed?

Clearing a machine lock up

If you make a mistake in operation, the cash register may lock up to avoid damage to programs and preset data.
Should it happens, you can use the following procedure to clear the lock up without losing any data.
1 Power off the register.
2 Insert the PGM key in the mode switch.
3 Press down f, and turn the mode switch to PGM mode.
4 Release f after count fi ve, then the display shows ten Fs.
5 Press s. The display shows ten Fs and issue a receipt.
Important!
• If the register does not show ten Fs, never press s and call service representative.
124
E
Plug in the power cord.
Set the mode switch to any position other than OFF.
Is the electrical outlet active?
Contact CASIO service
representative.
Is the mode position correct?
Contact CASIO service
representative.
Is paper loaded correctly?
Is the platen arm closed correctly?
Contact CASIO service
representative.
YES
N O
Use other outlet.
Set to correct position.
Load paper.
Set platen arm correctly.