To Print A Selected Read / Reset / Periodic Report On The Display - Casio SE-S6000 User Manual

Advanced Operations
*1 Zero totalled departments / functions (the amount and item numbers are both zero) are not printed.
*2 These items can be skipped by programming.

To print a selected read / reset / periodic report on the display

Instead of entering code to issue a report, you can select an appropriate report name shown on the display and issue
it.
1. Turn the mode key to X or Z or X2/Z2 mode.
2. Select report you want to get by the <RC> key.
In X mode, you can select Daily sales, PLU, group, hourly, monthly, open check, Flash and EJ report.
In Z mode, you can select Daily sales, PLU, group, hourly, monthly, open check and EJ report and EJ clear.
In X2/Z2 mode, you can select periodic1 read / reset and periodic2 read / rese report.
3. Press <CA/AMT> to print report.
X mode
X NEXT:RC
DAILY X
R-OFF
RPT T1 T2
AMOUNT
116
E
ZZ1 DEPT
0001115
DEPT01
8.13% •257.53
DISCOUNT
DEPT02 183
•1,362.26
DISCOUNT
------------------------
TL
•1,916.10
DISCOUNT
------------------------
ZZ1 CASHIER
0001117
C01 ...............1
GROSS 421.25
•2,872.28
NET No 111
•1,845.35
CAID •1,057.14
CHID •139.04
RF No
CLEAR No
C02 ...............1
Z mode
Z NEXT:RC
DAILY Z
~00
T3 T4 TOTAL CHANGE RPT
— Department report title / reset counter
0001
— Report code
— Department Name / No. of items
38
— Sales ratio / amount
*1
— Discount amount
•5.80
•17.22
— Total No. of items
88.61
— Total amount
— Discount amount total
•9.50
— Clerk report title / reset counter
0001
— Report code
— Clerk name / drawer No.
— Gross total
— Net total
— Cash in drawer
1
— Refund mode
•1.00
5
— Clear key count
•4.43
— Clerk name / drawer No.
~00
R-OFF T1 T2 T3 T4 TOTAL CHANGE
AMOUNT
*1
*1
X2/Z2 mode
XZ NEXT:RC
PERIODIC 1X
R-OFF
RPT T1 T2
AMOUNT
~00
T3 T4 TOTAL CHANGE