How To Connect To A Bluetooth Compatible Device (Pairing); For Bluetooth Compatible Device With Ssp (Secure Simple Pairing); For Bluetooth Compatible Device Without Ssp (Secure Simple Pairing); Auto Pairing With An Ipod/Iphone - Alpine CDE-185BT Owner's Manual

How to connect to a BLUETOOTH
compatible device (Pairing)
For details on the control from a BLUETOOTH compatible device, refer
to the Owner's Manual of the BLUETOOTH compatible device.
1
Using your BLUETOOTH compatible device, select the
"CDE-185Series" for pairing.
For BLUETOOTH compatible device with SSP
(Secure Simple Pairing)
2-1
Turn the Rotary encoder to change the head unit display
from "PAIR NO" to "PAIR YES", and then press ENTER.
If "PAIR NO" is selected, the connection will be cancelled.
For BLUETOOTH compatible device without SSP
(Secure Simple Pairing)
2-2
Input the PIN code ("0000") in a BLUETOOTH compatible
device.
Note
• The PIN code is fixed as "0000".
3
If the pairing was successful, "CONNECTED" is displayed
for a few seconds. The head unit then returns to its
previous state.

Auto pairing with an iPod/iPhone

When an iPod/iPhone is connected to the USB port, the unit will
automatically pair with it.
1
Make sure USB PAIR is set to ON. Refer to "Setting the Auto
Pairing with iPod/iPhone" on page 27.
2
Connect an iPod/iPhone to this unit's USB port.
3
Turn the Rotary encoder to select "PAIR YES", and then
press ENTER.*
If "PAIR NO" is selected, the connection will be cancelled.
Depending on the iOS version, you may need to turn on the
Bluetooth function manually on the iPod/iPhone side, then
perform this step.
4
If pairing is successful, "CONNECTED" is displayed for a
few seconds. The head unit then returns to its previous
state.
Notes
• If the device has been paired with this unit previously, it will not USB
Pair automatically.
• If the connection is unsuccessful, "FAILED" is displayed.
• After a successful pairing, the two devices should connect automatically
whenever the vehicle's ignition is turned ON. If the auto reconnect fails,
try to connection manually.
• Set "VISIBLE M" to ON to enable this unit to be recognised by a
BLUETOOTH compatible device, refer to "Setting the Visible Mode" on
page 27.
26
-EN

BLUETOOTH SETUP

The following steps 1 to 5 are common to the various BLUETOOTH
functions. For details, refer to each individual function.
Note
• Set BT IN to ON, and then perform BLUETOOTH SETUP operation.
Refer to "Setting the BLUETOOTH Connection (BT IN)" on page 26.
1
Press and hold AUDIOSETUP for at least 2 seconds to
activate the SETUP mode.
2
Turn the Rotary encoder to select "BLUETOOTH", and then
press ENTER.
The BLUETOOTH setup mode is activated.
3
Turn the Rotary encoder to select the desired items, and
then press ENTER.
BLUETOOTH:
*
 USB PAIR  PAIRED DEV  VISIBLE M 
BT IN
CALL SOUND  CALLER ID  PB UPDATE
AUTO ANS  SPEAKER SL  FW VERSION 
*
 BT IN
FW UPDATE
The items are not displayed during a phone call.
4
Turn the Rotary encoder to change the settings.
5
Press and hold AUDIOSETUP for at least 2 seconds.
The SETUP mode is cancelled.
Notes
• Press t to return to the previous mode.
• If no operation is performed for 60 seconds, the unit will return to
normal mode automatically.
Setting the BLUETOOTH Connection
(BT IN)
With BLUETOOTH technology, you can place a hands-free call by a
BLUETOOTH-equipped Smartphone.
Audio information of a BLUETOOTH compatible Smartphone, a
portable audio player, etc., is controllable/playable wirelessly from this
unit.
 Setting item: BT IN
Setting contents:
OFF / ON (Initial setting)
OFF:
Hands-Free Phone function and BLUETOOTH Audio function are
not used.
ON:
Select when you want to pair your BLUETOOTH compatible phone
with this unit or use BLUETOOTH Audio function.
Note
• When BT IN is set to OFF, the indicators related to Hands-free phone
(C battery charge and i signal strength) will not be displayed.
*
 PB ORDER 