General Setting; Setting The Clock Display (Clock Mode); Setting The Time To Automatically Be Adjusted; Setting The Menu Language - Alpine CDE-185BT Owner's Manual

4
Turn the Rotary encoder to change the setting, and then
press ENTER.
(e.g. Select ON or OFF)
5
Press and hold AUDIOSETUP for at least 2 seconds to
return to normal mode.
Notes
• Press t to return to the previous mode.
• If no operation is performed for 60 seconds, the unit will return to
normal mode automatically.

General Setting

GENERAL is selected on the setup main menu in step 2.

Setting the Clock Display (CLOCK MODE)

You can select the clock display type, 12-hour or 24-hour, depending on
your preference.
 Setting item: CLOCK MODE
Setting contents:
24H (Initial setting) / 12H

Setting the Time to automatically be adjusted

When ON is selected, the clock is adjusted automatically based on the
time data sent from the RDS broadcast.
 Setting item: AUTO CLOCK
Setting contents:
OFF / ON (Initial setting)
OFF:
To adjust it manually.
ON:
Adjust the clock automatically based on the time data.

Setting the Menu Language

Set the language to be displayed on the unit. Six types of font can be
selected.
 Setting item: MENU LANG
Setting contents:
ENGLISH (Initial setting) / RUSSIAN / GERMAN / FRENCH /
SPANISH / ITALIAN / DUTCH
Note
• The Owner's Manual only describes the setup menu display when
ENGLISH is set.

Setting the AUX SETUP mode

You can input the audio of an external device, (such as a Portable audio
player) to the AUX connector of this unit.
 Setting item: AUX SETUP
Setting contents:
OFF / ON (Initial setting)
OFF:
When set to OFF, AUX source cannot be selected.
ON:
Set to ON when a portable device is connected. If VSOURCE is
pressed and AUX is selected, the sound of the portable device is
input to the unit.

Setting the AUX NAME mode

You can change the AUX NAME display in the SETUP mode.
 Setting item: AUX NAME
Setting contents:
AUXILIARY (Initial setting) / TV / DVD / PORTABLE / GAME

Playing MP3/WMA/AAC Data (PLAY MODE)

This unit can play back CDs containing both CD and MP3/WMA/AAC
data (created in Enhanced CD (CD Extra) format). However, in some
situations, playback of an enhanced CD may be difficult. In this case,
you can choose to play back the CD data session only. When a disc
contains both CD and MP3/WMA/AAC data, playback starts from the
CD data portion of the disc.
 Setting item: PLAY MODE
Setting contents:
CD-DA / CDDA/MP3 (Initial setting)
CD-DA:
Only the CD data in Session 1 can be played back.
CDDA/MP3:
CD data, MP3/WMA/AAC files in mixed mode, and multi-session
discs can be played back.
Note
• Perform this setting before inserting a disc. If a disc has already been
inserted, remove it first.

Setting the stay on mode

You can set the delay in turning OFF the unit's power after the vehicle's
ignition is turned off (ACC OFF). When you select a mode other than
OFF, the music will be paused after you turn the ignition key off (ACC
OFF). At the same time, the prompt "PRESS PRESET 6 TO STAY ON"
will scroll once. Press 6 within 15 seconds to continue enjoying music
for the selected period. If 6 is not pressed, the unit will power off within
15 seconds. During this period, you can only receive a call by operating a
paired Smartphone.
 Setting item: STAY ON
Setting contents:
OFF (Initial setting) / 5 MIN / 15 MIN / 30 MIN
Note
• Note that there is a possibility that the battery may be drained if already
weak, during this period.

Demonstration

This unit has a demonstration feature for the display.
 Setting item: DEMO MODE
Setting contents:
ON (Initial setting) / OFF / QUITE OFF
ON:
The unit starts the demonstration if there is no operation for 30
seconds.
OFF:
Quit the demonstration mode. Note that if this unit is
disconnected from the vehicle's battery, the next time you use this
unit the DEMO mode will be ON.
QUITE OFF:
Quit the demonstration mode completely.
23
-EN