Connecting A Pc; Displaying A Pc Image On The Screen; Selecting The Picture Size - Sharp Aquos LC-32DH57E Operation Manual

Connecting a PC

Connecting a PC
HDMI Connection
PC
HDMI-certified cable
PC
DVI/HDMI cable
* When using the HDMI 2 terminal, you must select the proper
item in the "PC Audio Select" menu depending on the type of
HDMI cable connected (Refer to page 19 for details).
Analogue Connection
PC
RGB cable
PC
DVI/RGB conversion
cable
* When using the EXT 4 terminal, you must select "EXT 4 (RGB)"
in the "PC Audio Select" menu (Refer to page 19 for details).
HDMI 1, 2 or 3
HDMI 2*
ø 3.5 mm stereo
minijack cable
EXT 4*
ø 3.5 mm stereo
minijack cable
EXT 4*
ø 3.5 mm stereo
minijack cable
NOTE
• The PC input terminals are DDC1/2B-compatible.
• Refer to page 30 for a list of PC signals compatible with the TV.
• When connecting to a PC, the input signal type is automatically
detected.
Displaying a PC image on the
screen

Selecting the picture size

You can select the picture size.
1
Press f.
• The "WIDE MODE" menu displays.
2 Press f or a/b to select a desired item.
EXAMPLE
Normal
Full An image fully fills the screen.
For letterbox pictures. Bars may appear on the
Cinema
top and bottom with some programmes.
Keeps the original aspect ratio in a full screen
Normal
display.
Displays an image with the same number of
Dot by Dot
pixels on the screen.
NOTE
• Connect the PC before making adjustments.
• Selectable picture size may vary with input signal type.
• Refer to page 23 for AV signals.
HDMI: 480i/480p/576i/576p/720p/1080i/1080p
ANALOGUE RGB: 576p/720p (60 Hz)/1080i/1080p
Full
Item
25