Table of Contents
Advertisement
Watching TV
Teletext
What is Teletext?
Teletext broadcasts pages of information and
entertainment to specially equipped TV. Your TV receives
teletext signals broadcast by a TV network, and decodes
them into graphical format for viewing. News, weather
and sports information, stock exchange prices and
programme previews are among the many services
available.
Turning Teletext on/off
1
Select a TV channel or external source
providing a teletext programme.
2
Press m to display the Teletext.
•
Many stations use the TOP operating system, while
some use FLOF (e.g., CNN). Your TV supports both
these systems. The pages are divided into topic groups
and topics. After switching on the teletext, up to 2,000
pages are stored for fast access.
•
If you select a programme with no teletext signal, "No
Teletext available" displays.
•
The same message displays during other modes if no
teletext signal is available.
TELETEXT
Each time you press m, the screen switches as shown
•
above.
Press m again to display the teletext on the right screen
•
and the normal image on the left screen.
Teletext Language
If teletext information is not displayed correctly, select the
language type from among nine kinds of language tables;
"West Europe", "East Europe", "Russia", "Russia-2",
"Greek", "Turkey", "Arab/Hbrw", "Farsian", or "Arab".
1
Go to "MENU" > "Digital Setup" > "Teletext
Language" > "Decode Page Lang.".
2
Press c/d to select a receivable teletext
broadcasting language in your area, and
then press ;.
NOTE
•
Teletext can be displayed only when it is sent by a network. Not
used to convert between languages.
12
Buttons for teletext operations
Buttons
:r/s
Colour (Red/Green/
Yellow/Blue)
Numeric buttons
0_9
v (Top/Bottom/
Full)
k (Reveal hidden
Teletext)
3 (Freeze/Hold)
[ (Subtitle for
Teletext)
1 (Subpage)
Using the MHEG-5 application
TELETEXT
(UK only)
Some services bring you programmes with the MHEG
application encoded, letting you experience DTV
interactively. When provided, the MHEG-5 application will
start when you press m.
Description
Increase or decrease the page number.
Select a group or block of pages displayed in the
coloured brackets at the bottom of the screen by
pressing the corresponding Colour (Red/Green/
Yellow/Blue) on the remote control unit.
Directly select any page from 100 to 899 by using
the 0_9 numeric buttons.
Switch the teletext image to Top, Bottom or Full.
Reveal or hide hidden information such as an
answer to a quiz.
Stop updating teletext pages automatically or
release the hold mode.
Display the subtitle or exit the subtitle screen.
•
Subtitles will not be displayed when the service
does not contain subtitle information.
Reveal or hide subpages.
•
Red button: Move to the previous subpage.
•
Green button: Move to the following subpage.
•
These two buttons are shown on the screen by
the symbols "e" and "f".
Hide quick links:
Advertisement
Table of Contents
