Rear View - Crosley CDE2000FW0 Installation Instructions Manual

TOP CONSOLE MODELS
ROUGH-IN DiMENSiONS
;3 3/4_
(9.5 ¢m}
(68°3 cm}
2 9t16"_
(6.5 era}
318" {0ogg ¢m} DIA°
GAS PiPE
REAR ViEW
43 5/8°
(110.7 era}
3_ H
(91.5 cm)
B
4.3/8"
(11.1 cm}
OPTIONAL
VENT KNOCKOIJT. _
_" 27'
(68°6 cm}
SIDE ViEW
UNPACK/NG
Using the four shipping
carton
corner posts
(two on
each side),
carefully Jay the dryer on its left side and remove foam shipping
base,
To prevent damage, do not use the control panel as a
means to pick up or move the dryer,
NOTE: On under counter model clothes dryers, the top panel
may be removed for installation
2 Return the dryer to an upright position
REVERSING DOOR SWING
Your dryer is designed so the door swing may be reversed at any time
without additional parts, Conversion is accomplished by transferring
hinges to the opposite side of the cabinet
To change the direction of the door opening:
1 Open the dryer door, Remove the four hinge hole plugs from the
left side of the door opening Place nearby for future installation
NOTE: You may need a plastic knife to help pull out the plugs Be
careful not to scratch the paint,
2 Remove the four screws that secure the door hinges to the dryer
front panel (see below), NOTE; Remove one screw from each of
the two hinges first Hold the door firmly before removing the
last two screws,
3 Rotate the door 180 ° and reinstall the door hinges to the dryer
front panel with the four screws
4 Install the four hinge hole plugs in the open screw holes on the
right side of the door opening
REMOVE 4 SCREWS
(ONE FROM EACH
HINGE FIRST)
6