Technical Data - Graco MAGNUM 232738 Repair Manual

Airless sprayer
Hide thumbs Also See for MAGNUM 232738:
Table of Contents

Advertisement

Working pressure range
Electric motor
Operating horsepower
Maximum delivery (with tip)
Paint hose
Maximum tip hole size
Weight, sprayer only
Weight, sprayer, hose & gun
Dimensions:
Length
Width
Height
Power cord
Fluid inlet fitting
Fluid outlet fitting
Inlet screen on suction tube
Wetted parts, pump & hose
Wetted parts, gun
Generator requirement
Electrical power requirement
Storage temperature range *❖
Operating temperature range ✔
*
When pump is stored with non-freezing fluid. Pump damage will occur if water or latex paint freezes in pump.
❖ Damage to plastic parts may result if impact occurs in low temperature conditions.
✔ Changes in paint viscosity at very low or very high temperatures can affect sprayer performance.
28

Technical Data

dx Roller/Spray System
0 - 207 bar, 21 MPa (0 - 3,000 psi) 0 - 207 bar, 21 MPa (0 - 3,000 psi)
3.5 AMP (open frame, universal)
3/8
0.91 lpm (0.24 gpm)
7.6 m (25 ft) x 1/4 in.
0.38 mm (0.015 in.)
6 kg (13 lb)
7.8 kg (17 lb)
41 cm (16 in.)
46 cm (18 in.)
53 cm (21 in.)
2
3 wire, 1.0 mm
x 2.0 m (78 in.)
1/4 npsm external thread
450 micron (35 mesh)
stainless steel, brass, ultra-high
molecular weight polyethylene
(UHMWPE), carbide, nylon,
aluminum, PVC, polypropylene,
fluroelastomer
aluminum, brass, carbide, nylon,
plated steel, stainless steel,
UHMWPE, zinc
1500 Watt minimum
220-240 V AC, 50/60 Hz, 1 phase,
10 A
-35° to 71°C (-30° to 160°F)
4° to 46°C (40° to 115°F)
Technical Data
XR9 Sprayer
4.5 AMP (permanent magnet DC)
7/8
1.44 lpm (0.38 gpm)
15.2 m (50 ft) x 1/4 in.
0.48 mm (0.019 in.)
49.5 cm (19.5 in.)
48.3 cm (19 in.)
101.6 cm (40 in.)*
*Height with folded handle is 66 cm (26 in.)
2
3 wire, 1.0 mm
x2.0 m (78 in.)
1/4 npsm external thread
450 micron (35 mesh)
stainless steel, brass, leather,
ultra-high molecular weight
polyethylene (UHMWPE), carbide,
nylon, aluminum, PVC,
polypropylene, fluroelastomer
aluminum, brass, carbide, nylon,
plated steel, stainless steel,
UHMWPE, zinc
1500 Watt minimum
220-240 V AC, 50/60 Hz, 1 phase,
10 A
-35° to 71°C (-30° to 160°F)
4° to 46°C (40° to 115°F)
309477F

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents