Advertisement
Installation
ADDING ELBOW FOR EXHAUST
THROUGH BOTTOM OF CABINET
, Insert the elbow through the rear opening and connect
it to the drger internal duct.
Applg duct tape on the joint between the drger internal
duct and elbow, us shown on page 7.
.J
CA
Internal duct joints must be secured with tape,
otherwise they may separate and cause a
safety hazard.
ADDING COVER PLATE TO REAR OF
CABINET
PLATE
(KITWE1H858)
Connect standard metal elbows and ducts to complete
the exhaust sgstem. Cover back opening with a plate (Kit
WE11V1454) available from gout local service provider.
Place drger in final location.
,_WARNING-NEVER
LEAVE THE BACK
OPENING WITHOUT THE PLATE.
Instructions
CHANGING
DIRECTION OF
DOOR OPENING
REMOVE 4
HINGE SCREWS.
REMOVE/4 HOLE PLUGS AND
PLACE THEIVi INTHEHOLES
ONTHEOPPOSITE SIDE.
ROTATE
DOOR 1800
AND REINSTALL.
8
Advertisement
