Alcove Or Closet Installation - GE GTDS820ED0WS Installation Instructions Manual

Installation Instructions
[-_ LEVELING AND STABILIZING YOUR DRYER
Stand the dryer upright near the final location and adjust
the 4 leveling legs, at the corners, to ensure that the dryer
is level from side to side and front to rear.
LEVEL
SIDE-TO-SIDE
LEVEL
FRONT-TO-BACK
J
DOOR 90o
/4LEVELING LEGS
AWARNING
Explosion Hazard
Before the "Alcove or Closet
installation".
- Keep flammable materials and vapors,
such us gasoline, uwu9 from drger.
- Failure to do so can result in death,
explosion, or fire.
[] ALCOVE OR CLOSET INSTALLATION
- If gour drger is approved for installation in an alcove or closet, it will
be stated on a label on the drger back.
-The drger MUST be vented to the outdoors. See the EXHAUST
INFORMATION sections 3 &4.
- Minimum clearance between drger cabinet and adjacent walls or
other surfaces is:
0 in. either side 52 in. from floor to overhead cabinets.
3 in. front
3 in. rear
- Consideration must be given to provide adequate clearance for
installation and service
- Minimum vertical space from floor to overhead cabinets,
ceiling, etc. is 52 in.
-Closet ventilation openings required: 2 louvers each 60 square in.
(387 square cm}, located 3 inches (7.6 cm} from top and bottom
of door. If the closet contains both a washer and a drger, doors
must contain a minimum of 120 sq. in. of open area equallg
distributed.