GE JVM1600 Series Installation Instructions Manual page 14

Installation Instructions
MOUNT THE OVEN (continued)
CabinetFront
CabinetBottomShelf
Filler Block
__Equivalent
to Depth
of Cabinet
Recess
Self-AligningScrew
OvenTop
[]Attach tile oven to tile top cabinet by inserting
3 self_aligning screws through outer top cabinet
holes. TIIFn two fllll ttli'ns on each screw. Be sure
to keep power cord tight. Be careful not to pinch
the cord, especially when mounting flush to
bottom of cabinet.
[] Tighten tile three screws to tile top of tile oven
completel). (X._hile tightening screws, hold the
oxen in place against tile wall and tile top cabinet.)
_ Install filters. See tile Owner s Manual
grease
packed with tile oxen.
ADJUST THE EXHAUST
ADAPTOR
Open tile top cabinet and a(!iust tile exhaust adaptor
to connect to tile hotlse dtlct.
Damper
Backof
Oven
I-_ CONNECTING DUCTWORK
HouseDuct
[]Extend tile hot/se (h/ct down
to connect to
tile exhaust adaptor.
[] Seal exhaust duct joints using duct tape.
14