Lcd Display - Ultra Start 45xx Series Owner's Manual

Advanced 2-way remote starter/alarms
Hide thumbs Also See for 45xx Series:
Table of Contents

Advertisement

REMOTE VEHICLE STARTER

LCD DISPLAY

Programable Icons-
display are user/dealer programmable (see page 17 to enter).
TIMER ICON- When the vehicle starts in Timer Mode, this icon will
appear in conjunction with the usual icons that indicate that the vehicle
is running by the remote starter.
TELEPHONE ICON- N/A
KEY ICON- This icon is displayed if the ignition key is in the "ON" position or if
the system detected a start fault.
NOTE: The start fault must be corrected before the remote starter will activate
again (see page 19 for diagnostic codes).
NUMBER ICON- This icon is displayed to indicate First car or Second
car remote transmitter operations.
SIREN ICON- If the icon is displayed, the siren will work normally. If
the icon is not displayed, the siren delete feature is ON and the siren will
not be active if a button is pressed on the remote transmitter.
NOTE: Panic and car finder will still be active.
SHOCK SENSOR ICON- If this icon is displayed the shock sensor is
active. If this icon is not displayed the shock sensor is OFF.
SERVICE MODE ICON- This icon indicates the status of the Service
Mode feature. If this icon is present, the system is in Service Mode.
?
NOTE: In Service Mode, keyless entry and optional features will still
VIBRA MODE ICON- This icon indicates the status of the Vibra Mode
feature. If this icon is present, the remote transmitter will vibrate and not
chime when a function is chosen.
The six squares found at the bottom of the
function.
OWNER'S MANUAL
PAGE 17

Advertisement

Table of Contents
loading

This manual is also suitable for:

45 series

Table of Contents