Lcd Display; Status Icons - Ultra Start 35 SERIES Owner's Manual

2way remote starter/alarms
Hide thumbs Also See for 35 SERIES:
Table of Contents

Advertisement

OWNER'S GUIDE
Page 10

LCD DISPLAY

STATUS CHECK MODE This feature is used to
check the status of the system. To check the status
press and release Button #4 on the remote
transmitter. The remote will display the icons of the
active features on the LCD screen.
STATUS ICONS These icons display the current status of the system.
The icons may not all be present on the screen at all times, certain icons
will only turn on when a feature is activated.
ANTENNA ICON- This icon will be visible or show a series of lines
next to the icon whenever the remote is within transmitting range of the
vehicle. The icon will disappear when out of transmitting range.
KEY ICON- This icon will begin to flash when the remote starter button is
first pressed. After the vehicle has started this icon will stay on solid.
SIREN ICON- N/A
TRUNK ICON- This icon will be displayed on the LCD screen when the
trunk release is activated by the remote transmitter. This icon will be
displayed until the system is armed or if the status button is pressed.
BATTERY ICON- This icon is always present when the LCD screen.
This icon will indicate the current battery level for the remote transmitter.
The black area of the icon will disappear as the battery level decreases.
RUN TIMER- This icon activates during remote starting. The bar graph
will count down in 2 minute increments, indicating how much time is left
on the remote starter's runtime.
2WAY REMOTE STARTER

Advertisement

Table of Contents
loading

Table of Contents