Installing The Applications - Creative Blaster User Manual

4. Click the OK button.
The required files are copied to your
hard disk.
Figure 2-3: Windows 98 Add New Hardware
Wizard dialog box.
If a dialog box similar to Figure 2-4
appears:
Figure 2-4: Update Device Driver Wizard dialog
box when driver cannot be found.
1. Click the Other Locations button.
2. At the Select Other Locations dialog
box, click the Browse button and
select the folder
AUDIO\Language\WIN95DRV
where Language is the language of the
software that you want to install.
3. Click the OK button, and then click
the Finish button.
Some of the required files are copied
to your hard disk. However, an error
message stating that a file
(
2GMGSMT.SF2
found also appears.
2-2 Installing Software in Windows 95/98
or otherwise) cannot be
4. Click the OK button.
5. At the Copying Files dialog box, click
the Browse button and select the
folder
AUDIO\Language\WIN95DRV
where Language is the language of the
software that you want to install.
6. Click the Open button, and then click
the OK button twice.
The file is copied to your hard disk.
If a dialog box similar to Figure 2-5
appears, click the Next button, and follow
the instructions on the screen to complete
the installation of the driver.
Figure 2-5: Update Device Driver Wizard
dialog box at start of installation.
If a Version Conflict message box appears
about
VJOYD.VXD
the Yes button to keep the files.

Installing the Applications

1. If your installation disc is already in your
CD-ROM drive, eject the disc and insert it
again.
The disc supports Windows AutoPlay
mode and starts running automatically. If
not, see "Problems Installing Software"
on page D-1.
2. Follow the instructions on the screen to
complete the installation.
Note: It is highly recommended that you
install SB Live! Experience. It appears as a
check box on the AutoPlay screen.
and , click
MSJSTICK.DRV