Important Safety Instructions - GE JGSP28 Installation Instructions Manual

Installation Instructions
IMPORTANT SAFETY INSTRUCTIONS
FOR YOUR SAFETY:
o Do not try to light any appliance. Do not
touch any electrical switch; do not use any
phone in your building.
o Immediately call your gas supplier from a
neighbor's phone. Follow the gas supplier's
instructions.
o If you cannot reach your gas supplier, call
the fire department.
Installation and service must be performed by
a qualified installer, service agency or the gas
supplier.
This range has been design certified by
UNDERWRITERS LABORATORIES. You'll find
safety precautions in your Owner's Manual.
Read them carefully.
• Installation of this range must conform with
local codes or in the absence of local codes
with the National Fuel Gas Code, ANSI
Z223.1 -Latest edition.
• Be sure your range is installed properly by
a qualified installer or service technician.
• To eliminate reaching over surface burners,
cabinet storage above burner should be
avoided.
• Do not install the unit near an outside door
or where a draft may affect its use.
2