Advertisement
SETTING UP REMOTE SECURITY MONITORING
PORT FORWaRDING YOUR ROUTER aND THE CREaTION OF a DDNS aCCOUNT WITH DIGIMERGE IS REqUIRED IN ORDER FOR YOU TO HaVE REMOTE INTERNET aCCESS.
Connect one end of ethernet cable (not
1
supplied) to the DVR, the other end to the
broadband router (not included). Power
router and DVR ON if not already ON
LAN (LOCAL AREA NETWORK)
BACK OF A ROUTER (NOT INCLUDED)
WAN (WIDE AREA NETWORK)
BACK OF A GENERIC DVR
TO YOUR COMPUTER
NOTE: Go to MENU from under NETWORK SET
and select IP SET and set the DHCP to YES.
Save and Exit and allow few seconds for the
unit to obtain an IP Address from the Router.
Please note down the IP and MAC Address(s)
for further use on the DVR.
accessing the DVR locally / Remotely with a PC
9
Once the DVR and Network have been successfully configured, a connection can be made with a
Local PC (a PC within the same network as the DVR), or remotely (a PC from outside the network via
the Internet) using Microsoft Internet Explorer.
Local: Use the internal network IP address. For Example:
• http://192.168.0.150
If you are using a different Web server port number, you will need to add this to the end of the address
(i.e. using port 2005):
• http://192.168.0.150:2005
NOTE: YOUR COMPUTER AND YOUR DVR MUST BE CONNECTED TO THE SAME ROUTER
Remote: Use either the external IP address or the DDNS name:
• http://216.15.59.221
• http://tomsmith.digimerge.net
If you are using a different Web server port number, you will need to add this to the end of the address
(i.e. using port 2005):
• http://216.15.59.221:2005
• http://tomsmith.digimerge.net:2005
Internet Explorer Settings - Active X Controls
To correctly load the Web Client Software, the security settings in Internet Explorer may need to be
adjusted. Please refer to Pages 22-23 of the Operator's Manual for detailed information.
logging into live Monitoring
10
Once the Web Client application has loaded through Internet Explorer, a
pop-up window will appear. Log in as:
• Username: admin
• Password: 00000000 (may be different if the default system password
on your DVR was changed)
The Web Client software will load once the Login has been completed
successfully. Failure to login correctly will close the Web Client win-
Press the Connect Button to
view the Camera images
S T E P 4
Open your Web Browser. Enter
Record the MaC and IP addresses
2
3
http://ddns.digimerge.net
- This can be obtained by pressing the Info
button from the remote control
http://ddns.digimerge.net
HDD Capacity:
## GB / ## GB
FPGA Version:
############
Application:
############
RAMDisk Version: ############
Kernel Version:
############
IP Address:
###.###.###.###
MAC Address:
##:##:##:##:##:##
NOTE: YOU WILL BE REDIRECTED TO
https://secure.digimerge.net/webapp
an automated Confirmation
Select the Create New account
7
6
email will be sent to you.
link
Record the information below
Domain name:
User name:
Password:
IT'S all
ON THE WEB
FOR ADDITIONAL INFORMATION OR
TROUBLESHOOTING HELP, REFER
TO YOUR OWNERS MANUAL FOR
ASSISTANCE. YOU CAN ALSO CALL OR
EMAIL FOR FURTHER SUPPORT.
TOLL FREE TECHNICAL SUPPORT:
1-866-344-4674 OR +905-946-8477
EMAIL SUPPORT:
TECH@DIGIMERGE.COM
WEBSITE: WWW.DIGIMERGE.COM
Select the Create account Option
4
Create Account
Once the DDNS Account has been configured (and the account details are received in
Email), then these settings can be added to the DVR unit. See the DDNS Set menu options
on Page 35 of your owner's manual for further details.
DDNS Set
The options in the DDNS Set menu allow the DVR unit to be accessed remotely using the
Free DDNS Server and the internet. All information will need to be manually entered based
on information from the free DDNS Setup.Set the USE DYNAMIC IP option to YES if you
will be using the Free DNS Website service to connect to your DVR.
DDNS:
YES
Domain Name:
########
User Name:
########
Password: ########
DDNS Status Check
Save & Exit
application
Browser
&
MPEG4
with
DVR
Network
Pentaplex
SERIES
D300
CCTV
in
Value
for
Benchmark
The
Complete account Information
5
1. For Product License:
Select your Product Model
Number from the drop down
menu (D300 Series)
2. For Product Code enter
the MAC address (without
any space) recorded earlier
3. For URL Request choose a
URL Name (not to exceed 15
1
2
characters) (e.g. your name,
3
your company etc.)
Port Forward your Router. You will need
8
to Forward ports 2000 and 80 (default).
all routers are different. To Port Forward
your Router: Refer to your Router's
manual for specific instructions on Port
Forwarding.
Inc.
Technologies
Digimerge
2006
Copyright
3.0
Version
English
GUIDE
REFERENCE
qUICK
©
Advertisement
