Drain Hose Connection - Bosch SHI66A Installation Instructions Manual

THESE NSTALLA ON
IN U ONS J
_N_NDEDFORUSEBY I
QU_EDINSTALLE_ I
Be sure to follow your national
and local codes at all times.
Drain Hose
* Before beginning, turn off the water
supply!
The access hole for the drain hose should
be 1.25" (32 ram) diameter,
Use the hose damps and rubber
connection hose (Figure 3) to connect
the drain hose to the sink, disposer or
air gap (Figure 14).
Openings for drain lines must be
installed in the marked areas as
shown
in Figures 8 and 9 to avoid
interference with the dishwasher
frame or other
components.
Failureto provide the proper drain
Figure 12
f_ Air Gap_
Drain Hose
in Sink
with Air
Gap &
Rubber
Disposer o_8_ _
€ k. _7L--Trap .
_ J
Figure 13
connection height, 20" (508mm)
above floor [eve[ with high loop or
air gap, wiJ[ resuit in improper
of the dishwasher.
Improper
draining may cause
damage to the dishwasher,
Drain Hose
Connected
to Sink
Figure 14
www,boschappiiances,com
F@GL:ISH o 9