Final Checklist - Bosch SHI66A Installation Instructions Manual

C
Final Checklist
[] Check Electrical Requirements.
[] Be sure you have correct electrical supply and recommended grounding method.
[] Turn on the hot water shut-off valve and electrical supply. Incoming water
temperature should be 120°F-140°F (49°C-60°C).
[] Operate the dishwasher through one cycle and check for plumbing leaks.
If the dishwasher does not operate properly, refer to the SELF- HELP, CUSTOMER
SERVICE and WARRANI_f sections in the Use and Care Manuat.
Customer Service :Information
]:f service becomes necessary, contact your dealer or installer or an authorized service center. Do
not attempt to repair the appliance yourself. Any work performed by unauthorized personnel may
void the warranty. If problem persists, take the following steps (in the order listed below) until the
problem is corrected to your satisfaction.
2o
3.
Contact your installer or the Bosch Authorized Service Contractor in your area.
E-mail us from the Customer Service section of our web site, www.boschappliances.com,
Write to us at the address below:
BSH Home Appliances, Corp.
5551 McFadden Avenue
Hantington Beach, CA 92649
4. Call us at: 1-800/944o2904.
Please be sure to include (if writing), or have available (if calling), the following information:
Model Number
Serial Number
Date of Original Purchase
Date Problem Originated
Explanation of Problem
Also, if writing, please be sure to include a daytime phone number.
(You will find the model number and serial number information on the label located on the right-hand
side of the inner door of the dishwasher).
LEAVEINSTALLA_ON INSTRUCTIONS AND
USE & CARE MANUAL WITH OWNER,
www,boschappliances,com
FNGLISH- :[7