Drain Hose Connection - Bosch SHU 9950 Installation Instructions Manual

THESE INSTALLATION
INSTRUCTIONS ARE
INTENDED FOR USE BY
QUALIFIED INSTALLERS
Be sure to follow your national
and local codes at all times.
Drain Hose
• Before beginning, turn off the water
supply!
• The access hole for the drain hose should
be 1.25" (32 mm) diameter.
• Use the hose clamps and rubber
connection hose (Figure 3) to connect
the drain hose to the sink, disposer or
air gap (Figure 14).
Openings for drain lines must be
installed in the marked areas as
shown in Figures 8 and 9 to avoid
interference with the dishwasher
frame or other components.
CAUTION
Failure to provide the proper drain
connection height, 20" (508mm)
above floor level with high loop or
air gap, will result in improper
draining of
Improper draining
damage to the dishwasher.

DRAIN HOSE CONNECTION

the dishwasher.
may cause
www.boschappliances.com
Drain Hose
in Sink with
Air Gap/ No
Disposer
Drain Hose
in Sink
with Air
Gap &
Disposer
Drain Hose
Connected
to Sink
Air Gap
Rubber
Connector
Trap
Figure 12
Air Gap
Rubber
Connector
disposer
Trap
Figure 13
G, Fig 3
Figure 14
ENGLISH - 9