Amana AGR4422VDD0 Installation Instructions Manual page 5

Product Dimensions
26-3/4"
(67.9 cm)
depth with
handle
24-1/4"
(61.6 ore) _ _ 29-7/8" (75.9 cm)
_, width
Iht
46-1/4"
(117.5 cm)
overall
height
Installation Clearances
Cabinet opening dimensions shown are for 25" (64 cm) counter-
top depth, 24" (61 cm) base cabinet depth and 36" (91.4 cm)
countertop height.
If the cabinet depth is greater than 24" (61 cm), the oven frame
must extend beyond cabinet fronts by 1/2" (13 mm) minimum.
.....
30-1/8" (76.5 crn) see NOTE
I i. J
opening width .L
16" (45.7 cm) I 2" (5.1 cm) rain.
min. clearance space to
upperside
cabinetto
countertop I
,
Thisshaded area I
recommendedfor
side wall or other
combustible material
This shaded area
recommended for
installation
of gas pipe
10" (25.4 cm)
3" (5.1 cm)
(7.6 cm)---__
NOTE: 24" (61 cm) minimum when bottom of wood or metal
cabinet is protected by not less than 1/4" (0.64 cm) flame retar-
dant millboard covered with not less than No. 28 MSG sheet
steel, 0.015" (0.4 mm) stainless steel, 0.024" (0.6 mm) aluminum
or 0.020" (0.5 mm) copper.
30" (76.2 cm) minimum clearance between the top of the cooking
platform and the bottom of an unprotected wood or metal
cabinet.
IMPORTANT: If installing a range hood or microwave hood
combination above the range, follow the range hood or
microwave hood combination installation instructions for
dimensional clearances above the cooktop surface.