Traffic Counter - Garrett MAGNASCANNER PD 6500 Owner's Manual

9.7. MEMORY
An electrically erasable non-volatile memory stores all of the program settings whether
power is on or off. Batteries are not required.
9.8. DETECTION UNIT
The LCD, LED bar graph, touchpad controls, and the wiring, connections, and electron-
ics are stored neatly in the overhead panel. This integrated storage space eliminates
the problems often associated with an external control box.
9.9. CONTROL OUTPUTS
Solid state switches (low voltage AC or DC) for operating external alarms and control
devices.
9.10. INDICATORS
The ready light appears when power is on and the PD 6500 is ready to detect metal.
The alarm light and audible alarm activate when a metal object is detected within the
archway. An LED bar graph displays the amplitude of the detection signal. A large back-
alpha numeric multi-language liquid crystal display (LCD) with backlight reports all reg-
ulating, controlling and self-prompting functions.
Pinpoint lights located on the side panels of the exit side help the operator to identify
the precise location of a metal object within the walk-through, whether it is on the left,
center, or right side of the body, or from head to toe. In cases when the unit detects
more than one object, the pinpoint lights in the corresponding zones illuminate.
Pacing lights located on the side panels of the entrance side indicate whether or not a
patron may enter the walk-through. Green lights indicate walk and red lights indicate
wait.
9.11.

TRAFFIC COUNTER

A built-in and resettable traffic counter calculates the number of persons who pass
through the walk-through; the count is displayed on the LCD.
9.12. TAMPERPROOF
Dual-level access codes are required to set or change all sensitivity settings and detec-
tion programs; one level for use by supervisors to select program and sensitivity set-
tings and the other for initial set up and overall control. A non-resettable sequence code
logs any access attempts to the sensitivity codes. An audible alarm reports any unau-
thorized access attempt.
9.13. CONSTRUCTION
The PD 6500 is made of attractive scratch- and mar-resistant laminate with resilient
end caps, a control panel and heavy-duty aluminum crosspieces.
©2000 GARRETT METAL DETECTORS, INC.
6/19/00
MAGNASCANNER PD 6500
OWNER'S MANUAL
23
PN 1531100